Product ID:ALKALI RESISTANT PRIMER, 6-3 (111789E)
MSDS Date:10/09/1990
FSC:8010
NIIN:00N051675
MSDS Number: BTZQL

PPG INDUSTRIES INC

4325 ROSANNA DRIVE
ALLISON PARK, PA 15101
US

Emergency Phone: 304-843-1300

Info Phone: 800-245-2590; 800-441-9695

Cage: 47695

PPG INDUSTRIES INC

PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

PHTHALIC ACID, BENZYL BUTYL ESTER; (BUTYL BENZYL PHTHALATE)

CAS: 85-68-7

RTECS: TH9990000

Fraction By Weight: 1-2%

OSHA PEL N/K

ACGIH TLV: N/K

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

TALC (POWDER), CONTAINING NO ASBESTOS FIBERS; (MAGNESIUM

CAS: 14807-96-6

RTECS: WW2710000

Fraction By Weight: 10-15%

OSHA PEL 2 MG/M3 RDUST

ACGIH TLV: 2 MG/M3 RDUST

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 15-20%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 2-5%

OSHA PEL 200 PPM

ACGIH TLV: 50 PPM, S

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

SOLVENT NAPHTHA (PETROLEUM) MEDIUM ALIPHATIC; (MEDIUM

CAS: 64742-88-7

Fraction By Weight: 35-40%

OSHA PEL N/K

ACGIH TLV: N/K

SOLVENT NAPHTHA (PETROLEUM) LIGHT ALIPHATIC; (LIGHT

CAS: 64742-89-8

Fraction By Weight: 5-10%

OSHA PEL 300 PPM

ACGIH TLV: 300 PPM

FILM FORMERS, RESINS AND ADDITIVES

Fraction By Weight: 20-25%

OSHA PEL N/K

ACGIH TLV: N/K

CONCERNING LATEST HAZ LIST INFO & SAFE HNDLG &

RTECS: 9999999ZZ

CNTNS BUTYL BENZYL PHTHALATE(BBP). BBP HAS CAUSED

RTECS: 9999999ZZ

IN HUMANS. PROD CNTNS TITANIUM DIOXIDE. ANIMALS

RTECS: 9999999ZZ

STUDY DEVELOPED LUNG TUMORS. STUDIES W/HUMANS

RTECS: 9999999ZZ

CANCER FROM EXPOS. POTNTL FOR INHAL OF TITANIUM

RTECS: 9999999ZZ

OVEREXP ARE NOT EXPECTED, THERE IS NO SIGNIFICANT

RTECS: 9999999ZZ

EXPOSURE TO A CORROSIVE MATERIAL,

RTECS: 9999999ZZ

DETERM THE TYPE OF AIRBORNE CONTAMINANTS AGAINST

RTECS: 9999999ZZ

LIM & TO REMOVE DECOMP PRODS DURING WELDING/FLAME

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INGEST:HARMFUL/FATAL IF
SWALLOWED. EYES:CAUSES IRRIT. REDNESS, ITCH, BURNING SENSATION &
VISUAL DISTURB MAY INDICACTE EXCESS EYE CNTCT. SKIN:MAY CAUSE
MODERATE IRRIT. DRYNESS, ITCH, CRACKING, B URNING, REDNESS & SWELL
ARE CNDTNS ASSOC W/EXCESS SKIN CNTCT. INHAL:VAP & SPRAY MIST MAY BE
HARMFUL. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: VAP IRRIT EYES, NOSE & THROAT. RPTD
EXPOS TO HIGH VAP CONC MAY CAUSE IRRIT OF RESP SYS & PERMANENT
BRAIN & NERVOUS SYS DMG. EYE WATERING, HDCH, NAUS, DIZZ &
INCOORDINATION ARE INDICATIONS TH AT SOLV LEVELS ARE TOO HIGH.
INTENTIONAL MISUSE BY DELIB CONC & INHAL CONTENTS CAN BE
HARMFUL/FATAL. CHRONIC: (SUPDAT)
Medical Cond Aggravated by Exposure:NOT APPLICABLE.

First Aid:INGEST: DO NOT INDUCE VOMIT. EYES: FLUSH IMMED W/PLENTY OF
WATER FOR @ LEAST 15 MIN. SKIN: REMOVE PROMPTLY BY WIPING, FOLLOWED
BY WATERLESS HAND CLEANER & SOAP & WATER. INHAL: REMOVE TO FRESH
AIR. APP LY ARTF RESP & OTHER SUPPORTIVE MEASURES AS REQD. OTHER:
IF ANY OF THE FOLLOWING OCCUR DURING/FOLLOWING USE OF PROD, CNTCT
POIS CTL CTR/EMER ROOM/MD IMMED; HAVE MSDS INFO AVAIL:INGEST,
EXCESS (ING 14)

Flash Point Method:PMCC
Flash Point:80.0F,26.7C
Lower Limits:0.9%
Extinguishing Media:NFPA CLASS B EXTING (CO*2, DRY CHEM/UNIVERSAL AQ
FILM FORMING FOAM) DESIGNED TO EXTING NFPA CLASS IC FLAMM LIQ
FIRES.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
WATER SPRAY MAY BE INEFTIVE. WATER SPRAY MAY BE USED TO COOL CLSD
CNTNRS TO PVNT PRESS BUILD-UP & (SUPDAT)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD. ISOLATE FROM
HEAT, ELEC EQUIP, SPK & OPEN FLAMES. CLSD CNTNRS MAY EXPLODE WHEN
EXPOS TO EXTREME HEAT. DO NOT APPLY ON HOT (SUPDAT)

Spill Release Procedures:PROVIDE MAXIMUM VENT. ONLY PERS EQUIPPED
W/PROPER RESP & SKIN & EYE PROT SHOULD BE PERMITTED IN AREA. REMOVE
ALL SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST,
VERMICULITE/OTHER ABSORB MATL & PLACE INTO CNTNRS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED & PROTECTED FOR STORAGE OF NFPA
CLACC 1C FLAMMABLE LIQUIDS.
Other Precautions:IF MATL IS PART OF MULTIPLE COMPONENT COATING SYS,
READ MSDS(S) FOR OTHER COMPONENT(S) BEFORE BLENDING AS RSLTG MIX
MAY HAVE HAZ OF ALL OF ITS PARTS. CNTNRS SHOULD BE GROUNDED WHEN
POURING. AVOID FREE FALL OF LIQ IN EXCESS OF FEW INCHES.

Respiratory Protection:OVEREXP TO VAP MAY BE PREVENTED BY ENSURING VENT
CONTROLS, VAP EXHST/FRESH AIR ENTRY. NIOSH/MSHA APPRVD (TC-23C-)
PAINT SPRAY/AIR SUPPLIED (TC-19C-) RESP MAY ALSO REDUCE EXPOS. READ
RESP MFR'S INSTRUC TIONS & LITERATURE CAREFULLY TO (ING 15)
Ventilation:GEN DILUTION/LOC EXHST VENT IN VOL & PATTERN TO KEEP CONC
BELOW LOWEST SUGGESTED EXPOS LIMS, LEL BELOW STATED (ING 16)
Protective Gloves:NITRILE/NEOPRENE RUB/POLYVINYL ALCOHOL.
Eye Protection:ANSI APPRVD CHEM (WORK HYGENIC PRAC)
Other Protective Equipment:WEAR PROTECTIVE CLOTHING INCLUDING
IMPERMEABLE APRON. CLEAN OR DISCARD CONTAMINATED CLOTHING & SHOES.
Work Hygienic Practices:EYE PROT: WORKER GOGGLES W/FULL LENGTH
FACESHIELD .
Supplemental Safety and Health
FIRE FIGHT PROC: POSS AUTOIGNIT/EXPLO WHEN EXPOS TO EXTREME HEAT. IF
WATER IS USED, FOG NOZZ PREF. EXPLO HAZ: SURF. TOX GASES MAY FORM
WHEN PROD IS CONTACTED BY FLAME/HOT SURF. EFTS OF OVEREXP: TOLUEN E
APPEARS ON NAVY LISTING OF OCCUP CHEMREPRO HAZS. SEEK CONSULTATION
FROM APPROP HLTH PROFESSIONALS (ING 8)

Boiling Pt:B.P. Text:>230F,>110C
Vapor Pres:6
Vapor Density:HVR/AIR
Spec Gravity:1.09
Evaporation Rate & Reference:50 (BUOAC=100)
Solubility in Water:0.0%
Appearance and Odor:VISCOUS LIQUID WITH AN ODOR CHARACTERISTIC OF THE
LISTED SOLVENTS.
Percent Volatiles by Volume:66.70

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZ DECOMP PRODS WHEN
HEATED. WELDING, BRAZING/FLAME-CUTTING ON SURF COATED W/PROD MAY
PRDCE FUMES INCL CO.

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
WITH FEDERAL, STATE, PROVINCIAL & LOCAL ENVIRONMENTAL CONTROL
REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF
THROUGH AN APPROVED WASTE MANAGEMENT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.